[c-nsp] SSH issue

Phil Mayers p.mayers at imperial.ac.uk
Thu Feb 23 09:06:26 EST 2012


On 23/02/12 13:56, Chris Lane wrote:
> running a 7600 with s72033-advipservicesk9_wan-mz.122-33.SXH7
> actually just installed device, added crypto key rsa ~ all normal here,
> noting unusual to report.
> but, oddly this is what i am seeing when i try and ssh to box.
> The remote system refused the connection.


Do you have:

line vty ..
   transport input telnet ssh

?

If you have an access-class statement on the vty lines, is it valid for SSH

>
> I have loaded ssh to 100s of boxes so its not a learning issue...  I don't
> know how to debug,  we use radius, i can telnet without issue..

Well:

term mon
debug ip ssh

...to get started. Best login via telnet when doing this.

> ssh is the culprit..  Yet ssh is running
> SSH Enabled - version 1.99
>
> i have even zeroized the key and regenerated..
>
> any suggestions would be helpful

Can you do "sh run part line" and show us?


More information about the cisco-nsp mailing list