[c-nsp] SSH issue

[Chris Lane]

Thank you all to who replied.
This has been fixed.

it was a simple command i overlooked on the line vty
transport ssh.

thanks again
Chris

On Thu, Feb 23, 2012 at 9:08 AM, Andriy Bilous <andriy.bilous at gmail.com>wrote:

> vty 0 4
>  transport input ssh
> ?
>
> debug ip ssh on the router ssh -vvv on the client?
>
> On Thu, Feb 23, 2012 at 2:56 PM, Chris Lane <clane1875 at gmail.com> wrote:
> > running a 7600 with s72033-advipservicesk9_wan-mz.122-33.SXH7
> > actually just installed device, added crypto key rsa ~ all normal here,
> > noting unusual to report.
> > but, oddly this is what i am seeing when i try and ssh to box.
> > The remote system refused the connection.
> >
> > I have loaded ssh to 100s of boxes so its not a learning issue...  I
> don't
> > know how to debug,  we use radius, i can telnet without issue..
> > ssh is the culprit..  Yet ssh is running
> > SSH Enabled - version 1.99
> >
> > i have even zeroized the key and regenerated..
> >
> > any suggestions would be helpful
> >
> > Thanks
> > Chris
> > --
> > //CL
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
//CL