[c-nsp] ASA services module on Sup2T?

[Lars Christensen]

Hi Peter

Right now it's not supported, but keep an eye on upcoming software releases for the Sup2T.


Lars Christensen
CCIE #20292



Den 24/02/2012 kl. 11.45 skrev Peter Rathlev:

> Hi,
> 
> We're trying to find out if the ASA services module is supported on the
> Sup2T. Our guess it that it is, but the documentation isn't clear about
> it. We found the following references:
> 
> http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps11878/qa_c67-648478.html#wp9000260
> 
> The list says that the ASA module is supported, but the table underneath
> doesn't mention it.
> 
> http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.0SY/release_notes.html#wp2565770
> 
> ASA services module not mentioned as supported in the 15.0SY release
> notes.
> 
> http://www.cisco.com/en/US/customer/prod/collateral/modules/ps2706/ps11621/data_sheet_c78-672507.html#wp9000181
> 
> Does not list the Sup2T under "Supervisor Card" in "System
> Requirements".
> 
> Since the FWSM does seem to be supported, I'd guess that the ASASM is
> too. But maybe not in the current software releases.
> 
> Anybode have any hard facts about this?
> 
> -- 
> Peter
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/