[c-nsp] erspan for just one IP

[Andriy Bilous]

Depending on your hardware and topology you might be able to xconnect
RSPAN session through your L3. RSPAN supports ACLs to filter monitored
traffic.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/span.html#wp1033684
* You can use output access control lists (ACLs) on the RSPAN VLAN in
the RSPAN source switch to filter the traffic sent to an RSPAN
destination.


On Thu, Jan 12, 2012 at 3:44 AM, Robert Hass <robhass at gmail.com> wrote:
> Hi
>
> Is any way to have ERSPAN (on Cat6500) where traffic is copied only
> for one IP within VLAN.
> Eg. VLAN400, IP 2.2.2.2 (where VLAN consist /16 subnet and 2k active hosts)
>
> Robert
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/