[c-nsp] Event Manager

[Andriy Bilous]

Or https://supportforums.cisco.com/docs/DOC-19518

On Tue, Jan 17, 2012 at 10:48 AM, Andriy Bilous <andriy.bilous at gmail.com> wrote:
> https://supportforums.cisco.com/docs/DOC-19517
>
> On Tue, Jan 17, 2012 at 10:38 AM, Nick Hilliard <nick at foobar.org> wrote:
>> On 17/01/2012 00:15, Mohammad Khalil wrote:
>>> Hi all , i am looking for building an applet according to below
>>> i will track configuration changes via the syslog pattern CONFIG_I
>>> if detected , i will check the output for the show archive config differences
>>> if the output of this command was no changes (that mean no changes were made actually) , then i will do nothing
>>> otherwise ( an output detected and whatever the changes were ) i want to send a mail to myself
>>
>> There are several log parsers which can be configured to do this.  Splunk
>> should do it.  SEC (http://simple-evcorr.sourceforge.net/) will certainly
>> do it.
>>
>> Nick
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/