[c-nsp] disabling ATM F5 OAM Loopback / Continuity cells

[John Elliot]

Cheers Tony  - I only have(i.e. no cc):
(config-if-atm-vc)#no oam-pvc manage ?  <0-600>     OAM loopback frequency(seconds)  keep-vc-up  OAM loopback cells failure action  <cr>


Date: Mon, 30 Jan 2012 19:58:46 -0800
From: td_miles at yahoo.com
Subject: Re: [c-nsp] disabling ATM F5 OAM Loopback / Continuity cells
To: johnelliot67 at hotmail.com; cisco-nsp at puck.nether.net

Hi John,
Try "no oam-pvc manage cc" under the PVC to stop sending of CC.

regards,Tony.

        From: John Elliot <johnelliot67 at hotmail.com>
 To: cisco-nsp <cisco-nsp at puck.nether.net> 
 Sent: Tuesday, 31 January 2012
 1:49 PM
 Subject: [c-nsp] disabling ATM F5 OAM Loopback / Continuity cells
   


Hi Guys - We have a number of atm pvcs to carrier (For client tails) and we have a small number that experience outages(weekly) - The carrier has been investigating for months, and they have requested we disable ATM F5 OAM Loopback / Continuity cells on the PVC's on our core(Apparently in some instances, there end is not responding to these OAM/CC and they think this may be the cause)

I've looked this up, and have come across the following doc: http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/24soamcc.html  but it doesnt really state how to stop(disable) our atm pvc from sending the OAM/CC ? 

Platform is 7200 

Cheers         
                  
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/