[c-nsp] IOS 15.0 ipv6-related weirdness (fails to fallback to ipv4)
Michael Ulitskiy
mulitskiy at acedsl.com
Tue Jul 10 13:51:04 EDT 2012
On Tuesday 10 July 2012 13:23:51 Bruce Pinsky wrote:
> Michael Ulitskiy wrote:
> > Heh.
> >
> > c2800#sh ipv6 interface
> > VoIP-Null0 is up, line protocol is up
> > IPv6 is enabled, link-local address is FE80::226:99FF:FED0:1290
> > No Virtual link-local address(es):
> > No global unicast address is configured
> > Joined group address(es):
> > FF02::1
> > FF02::1:FFD0:1290
> > MTU is 1500 bytes
> > ICMP error messages limited to one every 100 milliseconds
> > ICMP redirects are enabled
> > ICMP unreachables are sent
> > ND DAD is not supported
> > ND reachable time is 30000 milliseconds (using 30000)
> >
> > Don't see any way to disable it. Can't even find any description what it is, but obviously it's
> > voip-related and this router is indeed sip gateway.
> > Now I have to make sure that sip servers it's talking to don't publish AAAA, until I manage
> > to upgrade to something that has it fixed.
>
>
> Have you tried?:
>
> int voip-null0
> no ipv6 enable
c2800#conf t
Enter configuration commands, one per line. End with CNTL/Z.
c2800(config)#int voip-null0
^
% Invalid input detected at '^' marker.
never that easy :(
More information about the cisco-nsp
mailing list