[c-nsp] Third-Party support providers for 650x switches ???

[Rinse Kloek]

Matthew,

Another option is to but a 7606 chassis (pretty cheap refurb) and put 
the line-cards and supervisor in the 7606 chassis. This chassis does 
support most classic line cards and the SUP720 supervisor.
7606 is supported until march 2015.

Rinse

Op 11-7-2012 16:20, Matthew Huff schreef:
> Unfortunately, the entire support is tied to the chassis, so support for the line cards, sup engine, etc will become EOS without the
> chassis under support.
>
> ----
> Matthew Huff             | 1 Manhattanville Rd
> Director of Operations   | Purchase, NY 10577
> OTA Management LLC       | Phone: 914-460-4039
> aim: matthewbhuff        | Fax:   914-460-4139
>
>
>> -----Original Message-----
>> From: Nick Hilliard [mailto:nick at foobar.org]
>> Sent: Wednesday, July 11, 2012 9:21 AM
>> To: Matthew Huff
>> Cc: 'cisco-nsp at puck.nether.net'
>> Subject: Re: [c-nsp] Third-Party support providers for 650x switches ???
>>
>> On 11/07/2012 13:43, Matthew Huff wrote:
>>> We have 4 x 6509 switches, each with 2 x Sup720 cards. In November,
>>> they non-E chassis go EOSL. At this time we can't justify upgrading them
>>> to the E chassis. Are there any providers that provide past EOSL support
>>> that anyone would recommend?
>> Just get a cold spare from ebay?  It's just the chassis that's going EoS,
>> and they're pretty cheap.
>>
>> Nick
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/