[c-nsp] [j-nsp] Broadband Model suggestion?

[Jared Mauch]

He may be looking for alternative vendors as well. :-)

Zhone has inexpensive CPE hardware. I have a few in my home lab. You can deploy them for a few 100 on the cheap if you already have SMF available. (just under $300 for everything).

Jared Mauch

On Jul 12, 2012, at 4:56 AM, Chris Kawchuk <juniperdude at gmail.com> wrote:

> Your Vendor's Sales Rep and Systems Engineer should be more than happy to help in this regard. =)
> 
> - CK.
> 
> On 2012-07-12, at 5:01 PM, Frank Norman wrote:
> 
>> Dear friends,
>> 
>> I need suggestion for broadband network based on xDSL & fiber based last
>> miles (GPON/Metro technologies), Subscriber base upto 40-50 thousand
>> customer,
>> 
>> Requirement for subscribers will be;
>> - Authentication & authorization
>> - Dynamic Rate-limiting policing (with Multi service support)
>> - Session state monitoring
>> - Session Accounting for Billing (prepaid/postpaid)
>> 
>> and other policies in standard broadband networks.
>> 
>> 
>> Now can someone tell me
>> 
>> 1) what are the standard models (PPPoE or DHCP ? ) that are being used in
>> such kind of broadband networks?? and which is more flexible??
>> 
>> 2) How is bandwidth management for subscribers is handled?? through the
>> same BRAS or by installation of separate devices like packeteer,
>> packetlogic etc
>> 
>> 2) Which devices/vendors can handle these kind of requirements??  (We
>> already have AAA radius expertise, so i am only concerned with network
>> equipment side)
>> 
>> 
>> 
>> Good Day!
>> 
>> Frank
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp