[c-nsp] MPLS Forwarding table (Two commands difference)
Mohamed Touré
mohamed.toure at secresys.com
Mon Jul 16 04:16:11 EDT 2012
+ sh mpls forwarding
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/mpls/command/reference/gr37fwd.html#wp1596071
RP/0/RP0/CPU0:router# show mpls forwarding location 0/1/CPU0
Local Outgoing Outgoing Next Hop Bytes
Label Label Interface Switched
------ ----------- ------------ --------------- ------------
22 Pop Label PO0/1/0/0 10.1.1.2 0
23 Pop Label PO0/1/0/0 10.1.1.2 0
24 Pop Label PO0/1/0/0 10.1.1.2 0
25 Unlabeled tt13 point2point 0
+ sh mpls ldp forwarding
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/mpls/command/reference/gr37ldp.html#wpmkr1642117
The following is sample output from the *show mpls ldp forwarding* command:
RP/0/RP0/CPU0:router# *show mpls ldp forwarding*
Prefix Label Label Outgoing Next Hop GR Stale
In Out Interface
------------------ ----- ---------- ------------ --------------- -- -----
2.2.2.2/32 22 ImpNull PO0/2/0/1 12.0.0.2 N N
3.0.0.1/32 24 20 PO0/2/0/1 12.0.0.2 N N
3.0.0.2/32 25 21 PO0/2/0/1 12.0.0.2 N N
3.0.0.3/32 26 22 PO0/2/0/1 12.0.0.2 N N
4.4.4.4/32 20 ExpNullv4 tt10 4.4.4.4 N N
4.4.4.5/32 21 ExpNullv4 tt10 4.4.4.4 N N
123.0.0.0/24 23 ImpNull PO0/2/0/1 12.0.0.2 N N
On 16 July 2012 08:19, Xu Hu <jstuxuhu0816 at gmail.com> wrote:
> Hi All,
>
> Anyone knows the difference between show mpls forwading and show mpls ldp
> forwarding?
>
> Best Regards,
> Hu Xu
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
--
Mohamed Touré
06 38 62 99 07
More information about the cisco-nsp
mailing list