[c-nsp] ASA - SSH/ASDM - Current logged on users

Hansen, Ulrich Vestergaard B. (E W EN R&D DT ES 1 2) uvh at siemens.com
Thu Jun 7 02:01:37 EDT 2012


Hi All

Thanks so far.

Unfortunately - 
Show asdm sessions only yields the source IP address and not the user who is currently working on the device.
So does it via the GUI | Monitoring -> properties -> Device Access and click ASDM/HTTPS/Telnet/SSH Sessions

Show ssh sessions works fine, but most of our people are using the ASDM. 
quota management-session is not available either on 8.0(5). Maybe it's time for a scheduled update.

Any other ideas?

Copy/paste from Help:
The following table describes the fields for monitoring active ASDM/HTTPS/Telnet sessions. 

Type  The type of connection (ASDM/HTTPS/Telnet). 
Session ID  The name of a currently connected ASDM/HTTPS/Telnet session. 
IP Address  The IP address of the host or network that is currently connected to the security appliance. 
Disconnect  Disconnects the selected ASDM/HTTPS/Telnet session from the security appliance. 
Refresh  Refreshes the dialog box display. 
 
The following table describes the fields for monitoring active SSH sessions. 
Client  The client type for the selected SSH session. 
User  The user name for the selected SSH session. 
 State  The state of the selected SSH session. 
 Version The version of SSH used to connect to the security appliance. 
 Encryption (In)  The inbound encryption method used for the selected session. 
 Encryption (Out)  The outbound encryption method used for the selected session. 
 HMAC (In)  The configured HMAC for the selected inbound SSH session. 
 HMAC (Out)  The configured HMAC for the selected outbound SSH session. 
 SID  The session ID of the selected session. 
 Disconnect  Disconnects an active SSH session connected to the security appliance. 
 Refresh  Refreshes the dialog box display. 
 
Best regards
Ulrich

-----Original Message-----
From: Chuck Church [mailto:chuckchurch at gmail.com] 
Sent: 6. juni 2012 18:49
To: Hansen, Ulrich Vestergaard B. (E W EN R&D DT ES 1 2); cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] ASA - SSH/ASDM - Current logged on users

Show ssh sess and show asdm sess should do it.

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Hansen, Ulrich
Vestergaard B. (E W EN R&D DT ES 1 2)
Sent: Wednesday, June 06, 2012 6:29 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASA - SSH/ASDM - Current logged on users

Hi nsp-group!

Is there a command or method to display the current logged on users on Cisco
ASA - like you can issue the "who" command in IOS.
Or is there a way we can display a visual banner upon login to ASDM
displaying who is working on the device?

We would like to avoid multiple users working on the same ASA at the same
time.

Best regards
Ulrich

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/




More information about the cisco-nsp mailing list