[c-nsp] 6500/SUP2/MSFC2 Port based EoMPLS capability

[Vinny Abello]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 6/8/2012 8:58 AM, Gert Doering wrote:
> Hi,
> 
> On Fri, Jun 08, 2012 at 08:40:16AM -0400, Jason Lixfeld wrote:
>> I'm going through feature navigator looking for compatibility and it says that port based EoMPLS is available in the 12.2SXF train, but for 7600/SUP2/MSFC2 combination.  Is this a typo?  I didn't think a SUP2 would work in a 7600.  Anyone running the 6500 variant who can confirm?
>>
>> Also, (understanding full well the SVI based EoMPLS based line card limitations) for port based on the same platform, I presume there are no line card restrictions for WS-X61XX, WS-X62XX and WS-X65XX series Ethernet based line cards, specifically?
> 
> Sup2 will only do MPLS if you have OSM modules.
> 
> Sup720/RSP720 will do port-based or subif-based (mux-uni) but not SVI-based,
> unless you have SIP/ES cards.

Just to throw a known working environment out there, I'm doing port based EoMPLS on a 6509 with Sup720-3BXL running SXH and WS-X67xx cards without a problem.

- -Vinny
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (MingW32)

iEYEARECAAYFAk/SBMwACgkQUyX7ywEAl3p8DgCgpbAfJ+m1RyBakHG/CzzXAdo9
1EgAoNBlk1LeoEYi14jo06DBUa6serrH
=6fS4
-----END PGP SIGNATURE-----