[c-nsp] Cisco 6513

[Joshua Morgan]

show interface Gi x/y capabilities | i ASIC

Sent from my iPhone

On 09/06/2012, at 1:58, Harry Hambi <harry.hambi at bbc.co.uk> wrote:

> 
> Hi, 
> I have a 6513 chassis running IOS 12.1(23)E and I'me trying to see the
> port to Asics mapping. 
> I'me using the command sh int mod capabilities...no joy, is there anther
> command I should be using?.Thanks in advance 
> 
> Rgds
> Harry
> 
> Harry Hambi BEng(Hons)  MIET  Rsgb
> 
> 
> http://www.bbc.co.uk/
> This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated.
> If you have received it in error, please delete it from your system.
> Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately.
> Please note that the BBC monitors e-mails sent or received.
> Further communication will signify your consent to this.
>                    
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/