[c-nsp] NPE-G1 hardware fault

[Skeeve Stevens]

Hey all,

We have a NPE-G1 which is shutting down not long after boot.

...from boot log...

*Voltage readings:
        +3.45 V       measured at +3.47 V
       +5.15 V       measured at +5.25 V
        +12.15 V      measured at +12.29 V
       -11.95 V      is unmeasured*

Initially all voltage readings are unmeasured.  It goes through them one by
one - we have a dump of this process.

As soon as it measures the last voltage reading, the unit initiates a self
shutdown.

**Jan  1 00:00:51.447: %ENVM-0-SHUT: Environmental Monitor initiated
shutdown*
*
*
Anyone know what the Voltage readings relate to and what this might be?

I have tried Google and the Cisco site without luck.
*

*
*Skeeve Stevens, CEO - *eintellego Pty Ltd
skeeve at eintellego.net ; www.eintellego.net

Phone: 1300 753 383; Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellego ;  <http://twitter.com/networkceoau>
linkedin.com/in/skeeve

twitter.com/networkceoau ; blog: www.network-ceo.net

The Experts Who The Experts Call
Juniper - Cisco – IBM