[c-nsp] Fw: LNS Error %VPDN-3-NORESOURCE:

[ar]

:



Yes I have a loopback on that VRF.
We configure different loopback interfaces per VRF.
Yes the VRF itself was configured.
IP cef enabled since MPLS is enabled.
I can actually ping loopback interface for this VRF on other MPLS PEs.

#sho ip cef summary              
IPv4 CEF is enabled and running

#sh ip vrf interfaces 
Interface              IP-Address     
 VRF                              Protocol
Lo101                  10.16.1.101     VRF-A                          up  


ip vrf VRF-A
 rd 100:109
 route-target export 100:109
 route-target import 100:109




________________________________
 From: Oliver Boehmer (oboehmer) <oboehmer at cisco.com>
To: Brian Turnbow <b.turnbow at twt.it>; ar <ar_djp at yahoo.com>; Tim Warnock <timoid at timoid.org> 
Cc: cisco-nsp <cisco-nsp at puck.nether.net> 
Sent: Friday, June 15, 2012 11:04 PM
Subject: RE: [c-nsp] LNS Error %VPDN-3-NORESOURCE:
 


> > I tried to authenticate one vrf-enabled l2tp session and one global
(no-
> > vrf).
> > The one with VRF can't authenticate. Giving me the error of "LNS no
> > resources for user..."
> > But the one with no-vrf was able to authenticate successfully.
> >
> 
> The below config only  shows one virtual template, do you have a
second for
> the VRF ?
> I believe you need to differentiate .

indeed, check the full diffs of the two configs. is "ip cef" enabled
globally? Is the respective VRF configured? Can you configure a loopback
in this VRF)?

    oli