[c-nsp] faulty line card

[chris stand]

I think we have done this before.  The configuration from the old card
did not go away until we did a "wr mem" and so when we put the new
card in the parts that were appropriate to the new card were kept.

But please do tell us what happens to yours.


>   7. Re: Faulty Card (Gert Doering)
> Message: 7
> Date: Mon, 25 Jun 2012 22:22:35 +0200
> From: Gert Doering <gert at greenie.muc.de>
> To: Harry Hambi <harry.hambi at bbc.co.uk>
>
> Hi,
>
> On Mon, Jun 25, 2012 at 10:40:54AM +0100, Harry Hambi wrote:
>> Hi experts,
>> I have a faulty card in a live network ( 16  SFM-capable 16 port
>> 10/100/1000mb RJ45 ), I have found a 48 port version of this card. Hope
>> this is not a stupid quesation, will the 48 port card work in this
>> chasis?, will the config go on the first 16 ports, the rest being
>> ignored?
>
> Since you're not telling us what switch you have, which backplane,
> which supervisor, and what sort of "48 port card" you have, this is
> impossible to answer with full confidence.
>
> The "SFM-capable" hints at the 16-port card being a WS-X6516-GE-TX in
> a Cat6500 switch - so "the 48 port version of this card" would then
> be the WS-X6548-GE-TX - which is likely going to work (same requirements
> regarding chassis and supervisor, but will draw more power), but not
> take the config.
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
>                                                           //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
>