[c-nsp] Nexus network Design - Switching LOOP

[Chris Evans]

Switch the 3750 to use flex links. That way you can have redundancy without
causing a loop.
On Mar 13, 2012 9:50 AM, "Ryan West" <rwest at zyedge.com> wrote:

> N2k's do not run spanning-tree and will block ports if a bpdu is detected.
> You can disable spanning tree on those ports, but your 3750 will be flat at
> that point.
>
> Sent from handheld
>
> On Mar 13, 2012, at 8:57 AM, "Nick Hilliard" <nick at foobar.org> wrote:
>
> > On 13/03/2012 11:56, jack daniels wrote:
> >> In this scenario Switching LOOP is getting formed. Only way I'm able
> >> to get rid is shutdown Port eth1/1 on Nexus2K-2. Please help in this
> >> case.
> >
> > are the 3750 and both the n5k boxes running spanning tree?
> >
> > Nick
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>