[c-nsp] Nexus network Design - Switching LOOP

[-Hammer-]

We did support you. We sent you links to the design guide as well as 
explained why you are having the STP issue. What else do you want/need?

-Hammer-

"I was a normal American nerd"
-Jack Herer



On 3/13/2012 8:58 AM, jack daniels wrote:
> Hi Chris,
>
> I appriciate your suggestion , for Flex links this can surely help.
>
> Hi All,
>
> Request your suggestion support on this.
>
>
> Regards
>
>
> On Tue, Mar 13, 2012 at 7:21 PM, Chris Evans<chrisccnpspam2 at gmail.com>  wrote:
>> Switch the 3750 to use flex links. That way you can have redundancy without
>> causing a loop.
>>
>> On Mar 13, 2012 9:50 AM, "Ryan West"<rwest at zyedge.com>  wrote:
>>> N2k's do not run spanning-tree and will block ports if a bpdu is detected.
>>> You can disable spanning tree on those ports, but your 3750 will be flat at
>>> that point.
>>>
>>> Sent from handheld
>>>
>>> On Mar 13, 2012, at 8:57 AM, "Nick Hilliard"<nick at foobar.org>  wrote:
>>>
>>>> On 13/03/2012 11:56, jack daniels wrote:
>>>>> In this scenario Switching LOOP is getting formed. Only way I'm able
>>>>> to get rid is shutdown Port eth1/1 on Nexus2K-2. Please help in this
>>>>> case.
>>>> are the 3750 and both the n5k boxes running spanning tree?
>>>>
>>>> Nick
>>>>
>>>> _______________________________________________
>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>