[c-nsp] VSS display of show run on standby switch

[Xu Hu]

You just want to see the series number of supervisor in standby?
Check the show inventory raw command to see whether you can find the answer
or not.

Xu Hu
2012/3/14 Brad Clausen <overkillxx at gmail.com>

> Hey Guys,
>
> I have 2 x 6509's running as a virtual switch (VSS). I can't for the likes
> of me work out the command to display the serial number details of the
> Supervisor that is in standby.  The Show run displays the details of the
> active supervisor.
>
>
> OMESW001#sho switch virtual
> Switch mode                  : Virtual Switch
> Virtual switch domain number : 100
> Local switch number          : 2
> Local switch operational role: Virtual Switch Active
> Peer switch number           : 1
> Peer switch operational role : Virtual Switch Standby
> OMESW001#
>
>
> how can I display the show run equivalent on peer switch 1?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>