[c-nsp] ASR 1006 Code

[James Slepicka (c-nsp)]

I recently upgraded a couple of these to 15.2(1)S1 to address crashes caused by the IPC Check Queue process.  It's only been a couple of weeks but so far, so good.

James

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of N. Max Pierson
Sent: Thursday, March 22, 2012 9:14 AM
To: Cisco Mailing list
Subject: [c-nsp] ASR 1006 Code

Hi List,

Turning up a few new 1006's and would like to hear from those of you on a stable revision of XE. W're currently running on 15.1(2)S1 and have hit quite a few bugs. Our Cisco team says we should move to 15.2.(1)S1. Being this release is relativity new, i'm a little hesitant to jump to it. The last go around had us on an image ridden with bugs after some exposure.

Features used ... nothing really exotic ....

BGPv4
EIGRPv4
Netflow
QoS
IP Sla

Any recommendations would be great.

Regards,
Max
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/