[c-nsp] QoS on Multilink T1's.

[Joseph Mays]

The router is a 7206VXR (NPE400) running 12.3.(22). I am out of ideas as it 
stands, so I was thinking about upgrading the IOS.

----- Original Message ----- 
From: "Craig Dickerson" <Craig.Dickerson at LogixCom.com>
To: "Joseph Mays" <mays at win.net>
Sent: Friday, March 23, 2012 4:01 PM
Subject: RE: [c-nsp] QoS on Multilink T1's.


We have had a similar problem before. Have you tried removing the policy
form the interface and then re-applying it? If this works you may have a
software bug.

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Joseph Mays
> Sent: Friday, March 23, 2012 1:49 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] QoS on Multilink T1's.
>
> > You might try using an actual KBS number instead of percentages for
> > the multilink.
>
> That's what I was doing before. I changed to the percent in the
process of
> trying to figure out this problem.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/