[c-nsp] Cisco 7201 rate-limit or aggregate policer

[Artyom Viklenko]

Hi, List!

I need to rate-limit traffic on two subinterfaces facing
a single customer. These two subifs used for building reliable
connection to the customer using OSPF and two links with
different vlans.

On Cisco 7600 it culd be done using aggregate policer and
one policy-map applied to two SVIs. But is something similar
possible on 7201?

IOS on this router c7200p-advipservicesk9-mz.124-24.T6.bin.

Thanks in advance!

-- 
            Sincerely yours,
                             Artyom Viklenko.
-------------------------------------------------------
artem at aws-net.org.ua | http://www.aws-net.org.ua/~artem
artem at viklenko.net   | JID: artem at jabber.aws-net.org.ua
FreeBSD: The Power to Serve   -  http://www.freebsd.org