[c-nsp] Cisco 7201 rate-limit or aggregate policer

[Artyom Viklenko]

On 28.03.2012 19:45, Saku Ytti wrote:
> On (2012-03-28 09:08 -0700), Chris Hunt wrote:
>
>> interface GigabitEthernet0/1.310
>>   encapsulation dot1Q 310
>>   rate-limit input 11000000 2062500 4125000 conform-action transmit
>> exceed-action drop
>>   rate-limit output 11000000 2062500 4125000 conform-action transmit
>> exceed-action drop
>
> I would recommend rather using MQC, I don't think this is any more
> officially supported.
> I recall some 7 years ago on NSE100 where this command disappeared from IOS
> and we migrated to MQC and got customer complaint, as it actually started
> working and customers were unhappy with the new lower speed connections.
>

We use rate-limits like this:

  rate-limit input 30720000 3840000 3840000 conform-action transmit 
exceed-action drop
  rate-limit output 30720000 3840000 3840000 conform-action transmit 
exceed-action drop

All ok. No complaints about speed. :)


-- 
            Sincerely yours,
                             Artyom Viklenko.
-------------------------------------------------------
artem at aws-net.org.ua | http://www.aws-net.org.ua/~artem
artem at viklenko.net   | JID: artem at jabber.aws-net.org.ua
FreeBSD: The Power to Serve   -  http://www.freebsd.org