[c-nsp] Cisco 7201 rate-limit or aggregate policer

[Saku Ytti]

On (2012-03-29 08:56 +0300), Artyom Viklenko wrote:
 
> These commands will rate-limit traffic only on Gi0/1.310.
> 
> But I need to rate-limit two interfaces simultaneusly. Say, limit
> traffic on both Gi0/1.10 AND Gi0/1.20 to 20Mbps in total.

IRB and bridge-group in interfaces and L3 + MQC in BVI?

Really you shouldn't be using 'rate-limit/CAR' ever, any more. Just MQC.
-- 
  ++ytti