[c-nsp] MPLS TE Load Balancing

[Xu Hu]

Actually from the command " show route 10.100.100.7 " we can see the two
path is the same metric.
You are using OSPF for TE, or ISIS? Can check the database if the metric if
same or not?
Because i think by default the cost is same, will load-share the traffic.
BTW, just now, i check my ASR9000, also cannot support.

interface tunnel-te1
 load-share 2
!!% The requested operation is not supported: Feature not supported on this
platform
!
end

Xu Hu

2012/3/30 Dmitry Kiselev <dmitry at dmitry.net>

> Hi!
>
>
> Yes, unlinke CRS, MPLSTE Unequal Load Balancing currently is not supported
> on both Trident and Typhoon A9K cards.
> Seems it will be supported on Typhoon in the future, but not on Trident.
>
> So, it is difinitely not Your case :)
>
> --
> Dmitry Kiselev
>
> On Thu, Mar 29, 2012 at 09:02:27PM -0500, omar parihuana wrote:
>
> > Hi Xu Hu:
> >
> > I've tried to configure load-share unfortunately it is not supported :(
> >
> > RP/0/RSP0/CPU0:9K6-413(config-if)#load-share 100
> > RP/0/RSP0/CPU0:9K6-413(config-if)#interface tunnel-te501
> > RP/0/RSP0/CPU0:9K6-413(config-if)#load-share
> > % Incomplete command.
> > RP/0/RSP0/CPU0:9K6-413(config-if)#load-share 100
> > RP/0/RSP0/CPU0:9K6-413(config-if)#commit
> >
> > % Failed to commit one or more configuration items during a pseudo-atomic
> > operation. All changes made have been reverted. Please issue 'show
> > configuration failed' from this session to view the errors
> > RP/0/RSP0/CPU0:9K6-413(config-if)#show configuration failed
> > Fri Mar 30 00:58:07.275 UTC
> > !! SEMANTIC ERRORS: This configuration was rejected by
> > !! the system due to semantic errors. The individual
> > !! errors with each failed configuration command can be
> > !! found below.
> >
> >
> > interface tunnel-te501
> >  load-share 100
> > !!% The requested operation is not supported: Feature not supported on
> this
> > platform
> > !
> > interface tunnel-te502
> >  load-share 100
> > !!% The requested operation is not supported: Feature not supported on
> this
> > platform
> > !
> > end
> >
> > RP/0/RSP0/CPU0:9K6-413#show platform
> > Fri Mar 30 00:59:35.525 UTC
> > Node            Type                      State            Config State
> >
> -----------------------------------------------------------------------------
> > 0/RSP0/CPU0     A9K-RSP-4G(Active)        IOS XR RUN       PWR,NSHUT,MON
> > 0/0/CPU0        A9K-2T20GE-B              IOS XR RUN       PWR,NSHUT,MON
> > RP/0/RSP0/CPU0:9K6-413#show ver
> > Fri Mar 30 00:59:41.689 UTC
> >
> > Cisco IOS XR Software, Version 4.0.3[Default]
> > Copyright (c) 2011 by Cisco Systems, Inc.
> >
> > ROM: System Bootstrap, Version 1.05(20101118:025914) [ASR9K ROMMON],
> >
> > 9K6-413 uptime is 3 weeks, 3 days, 8 hours, 43 minutes
> > System image file is "bootflash:disk0/asr9k-os-mbi-4.0.3/mbiasr9k-rp.vm"
> >
> > cisco ASR9K Series (MPC8641D) processor with 4194304K bytes of memory.
> > MPC8641D processor at 1333MHz, Revision 2.2
> > ASR-9006 AC Chassis
> >
> >
> > Rgds.
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>