[c-nsp] Failing to load IOS

[Chuck Church]

Is this a case where a bootldr file is needed?  Does the ROMMON understand
the disk1: filesystem?  In ROMMON, can you do a 'dev' and see the
filesystem, or do a 'dir' on it?  I haven't played with too many of the
older 7200s, but I seem to remember this.

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joseph Mays
Sent: Friday, March 30, 2012 12:23 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Failing to load IOS

From: "Andriy Bilous" <andriy.bilous at gmail.com>
> What 'show bootvar' says?

gw1.armplc#show bootvar
BOOT variable =
disk1:c7200-is-mz.124-13b.bin,12;slot0:c7200-is-mz.123-22.bin,12;
CONFIG_FILE variable does not exist
BOOTLDR variable =
Configuration register is 0x2102

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/