[c-nsp] CAB-SFP-50CM & 2960S

[Andrew Jones]

That is correct, a 10gig interface will report as 10gig.....

Andrew Jones
Alphawest

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mal
Sent: Monday, 7 May 2012 5:00 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] CAB-SFP-50CM & 2960S

Anyone successfully using CAB-SFP-50CM between 2960S switches
(WS-C2960S-48LPD-L)  ?  

 

I have a link up between two 10G 2960S SFP+ port interfaces (and can
ping across it) but its reporting a "10Gig" speed connection via the
cab-stack-50 SFP cable..

 

 

Switch# sho inventory

NAME: "1", DESCR: "WS-C2960S-48LPD-L"

PID: WS-C2960S-48LPD-L , VID: V02  , SN: xx

 

NAME: "TenGigabitEthernet1/0/1", DESCR: "SFP-10GBase-CX1"

PID: CAB-SFP-50CM        , VID: V01  , SN: xx

 

 

Mal

 

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/