[c-nsp] Monitoring 6K performance (pps)

[Kyle Duren]

You can use snmp to collect packets/sec also, cacti can make nice graphs
for both mb/sec and packets/sec

-Kyle

On Sat, May 12, 2012 at 11:19 PM, Aaron Riemer <ariemer at amnet.net.au> wrote:

> Hey guys,
>
>
>
> We are looking at upgrading our CAT6K SUP's and I am trying to figure out
> how I can monitor the current throughput.
>
>
>
> We currently monitor the interface utilisation (bits / sec) with SNMP. That
> is all well and good but I am looking to obtain raw packets per second
> (pps)
> that are actually processed by the switch. Obviously bits / sec are not the
> same as packets / sec.
>
>
>
> Is there any real way to go about this other than monitoring each interface
> and calculating a total for a given time period?
>
>
>
> Ideas?
>
>
>
> Cheers,
>
>
>
> Aaron.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>