[c-nsp] 回复: RE: Monitoring 6K performance (pps)

Mon May 14 23:09:22 EDT 2012

Yep that's what I'm after thanks!. Need to find the OID's  now :D

With the output of the 'show mls statistics' command would that be total
packets since up time?

What would be nice would be a 5 minute rate or something. I would like to
see peaks etc rather than an uptime average if that makes sense.

At the moment it looks like I can't justify going to SUP2T :D

Thanks for all the valued input guys.

Cheers,

Aaron.

From: jstuxuhu0816 [mailto:jstuxuhu0816 at gmail.com] 
Sent: Tuesday, 15 May 2012 9:41 AM
To: Mack McBride; Aaron Riemer; 'Kyle Duren'
Cc: cisco-nsp; 许, 虎
Subject: 回复: RE: [c-nsp] 回复: RE: Monitoring 6K performance (pps)

Yes, you are right, through the 'show mls statistics' we can check the L3
forwarding speed. That's what Aaron want.

Also can combine the command of show plat hardware capacity  to check much
more information.

Best Regards,

Hu Xu

发件人： Mack McBride <mailto:mack.mcbride at viawest.com> 

发送时间： 2012-05-15 00:45

收件人： jstuxuhu0816 <mailto:jstuxuhu0816 at gmail.com> ; Aaron Riemer
<mailto:ariemer at amnet.net.au> ; 'Kyle Duren' <mailto:pixitha.kyle at gmail.com>

抄送： cisco-nsp <mailto:cisco-nsp at puck.nether.net> 

主题： RE: [c-nsp] 回复: RE: Monitoring 6K performance (pps)

You would need to capture this for each DFC/PFC.

The equivalent command line is 'show mls statistics'

In the command output there is a total L3 packets processed but that does
not include layer 2 packets processed.

I would have to research OIDs for the equivalent of that command.

Mack

-----Original Message-----

From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jstuxuhu0816

Sent: Monday, May 14, 2012 7:02 AM

To: Aaron Riemer; 'Kyle Duren'

Cc: cisco-nsp

Subject: [c-nsp] 回复: RE: Monitoring 6K performance (pps)

Because i saw your original email said "looking to obtain raw packets per
second (pps) that are actually processed by the switch." 

Through this command, you can got this result?

Best Regards,

Hu Xu

发件人： Aaron Riemer

发送时间： 2012-05-14 20:43

收件人： '许, 虎'; 'Kyle Duren'

抄送： 'cisco-nsp'

主题： RE: Re: [c-nsp] Monitoring 6K performance (pps) What do you mean you
don't see any useful result?

I am monitoring the data you see in your show command via SNMP and graphing
this in Cacti.

Cheers,

Aaron.

From: jstuxuhu0816 [mailto:jstuxuhu0816 at gmail.com]

Sent: Monday, 14 May 2012 7:18 PM

To: Aaron Riemer; 'Kyle Duren'

Cc: cisco-nsp

Subject: Re: Re: [c-nsp] Monitoring 6K performance (pps)

Hi Aaron,

Just now i monitored the utilization of fabric through command "show fabric
utilization detail ", i don't see any useful result for your case, see as
bellow:

Router#show fabric utilization detail

  Fabric utilization:     Ingress                    Egress

    Module  Chanl  Speed  rate  peak                 rate  peak

    1       0        20G    1%    0%                   1%    0%

    1       1        20G    1%    0%                   0%    0%

    4       0         8G    0%    0%                   0%    0%

    5       0        20G    1%    0%                   2%    0%

    6       0        20G    0%    0%                   0%    0%

    7       0         8G    0%    0%                   0%    0%

    8       0        20G    0%    0%                   1%    0%   

I don't understand how you can see the result, let me know if you have any
progress about this issue.

Thanks and Regards,

Hu Xu

From: Aaron Riemer

Date: 2012-05-13 15:29

To: 'Kyle Duren'

CC: cisco-nsp

Subject: Re: [c-nsp] Monitoring 6K performance (pps) Hi Kyle,

I have had a think about this a little more. It is probably more worthwhile
monitoring the utilisation of the fabric on all blades rather than counting
up packets per second per interface. I understand that I would lose
visibility of any local switching going on (i.e. traffic not traversing the
switch fabric).

Please see my other post. Any comments welcome :)

Cheers,

Aaron.

From: Kyle Duren [mailto:pixitha.kyle at gmail.com]

Sent: Sunday, 13 May 2012 3:12 PM

To: Aaron Riemer

Cc: cisco-nsp at puck.nether.net

Subject: Re: [c-nsp] Monitoring 6K performance (pps)

You can use snmp to collect packets/sec also, cacti can make nice graphs for
both mb/sec and packets/sec

-Kyle

On Sat, May 12, 2012 at 11:19 PM, Aaron Riemer <ariemer at amnet.net.au> wrote:

Hey guys,

We are looking at upgrading our CAT6K SUP's and I am trying to figure out
how I can monitor the current throughput.

We currently monitor the interface utilisation (bits / sec) with SNMP. That
is all well and good but I am looking to obtain raw packets per second (pps)
that are actually processed by the switch. Obviously bits / sec are not the
same as packets / sec.

Is there any real way to go about this other than monitoring each interface
and calculating a total for a given time period?

Ideas?

Cheers,

Aaron.

_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________

cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp

archive at http://puck.nether.net/pipermail/cisco-nsp/