[c-nsp] PoP size equipment

[MKS]

Yes a pair of MX80 is a valid option, but in cisco land?

//MKS

On Tue, May 22, 2012 at 11:29 PM, Tim Jackson <jackson.tim at gmail.com> wrote:
> Pair of MX80s.
>
> On May 22, 2012 5:33 PM, "MKS" <rekordmeister at gmail.com> wrote:
>>
>> Hi
>>
>> Imagine a town of 15.000-20.000 people. What type of device/devices
>> and size would you put into this town, given the following
>> requirements
>>
>> Residential triple play (HSI, VoD, Multicast)
>>   8 IP dslams (GigE)
>>   Vod servers (4 GigE pors)
>>
>> Business connections (L3VPN)
>>   10 Business connections on GigE
>>   30-40 Business connections 10-100 mb
>>
>> AToM
>> ATMoMPLS port mode, 4 STM1 ports needed.
>>
>> Uplinks on 10GbE in a ring based structure, current traffic levels 2-3
>> gigs total
>> BNG termination (pppoe) is not a requirement
>>
>> Spare parts are located 4-5 hours away.
>>
>> 1) If you where given a clean slate, what would you put in?
>> 2) What do you put normally, given your normal capex level.
>>
>> Regards
>> MKS
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/