[c-nsp] leaking only a couple routes between 2 vrf's

[Keith Croxford]

Use an export map within the VRF:


1. Build an ACL to match the subnet to be leaked. 
2. Create a route-map. 
	Match the acl
	Set the extcommunity rt to an rt that vrf2 is set to import. 
3. Within the VRF config, associate the route-map with an export map. 




-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Aaron
Sent: Thursday, November 01, 2012 2:29 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] leaking only a couple routes between 2 vrf's

What is a clean/easy way to leak a couple routes between two vrf's ?  if you have links to docs or sites that explain this or you know how , lemme know please.

Aaron

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/