[c-nsp] Show mac adresses connected to ports

Harold 'Buz' Dale buz.dale at usg.edu
Fri Nov 2 11:23:00 EDT 2012


Try "show cam" or "sh mac address-table"
"show arp" can also be quite useful depending on the device. 
Luck,
Buz

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Harry Hambi
Sent: Friday, November 02, 2012 11:19
To: 'cisco-nsp at puck.nether.net'
Subject: [c-nsp] Show mac adresses connected to ports

Hi all,
Is there a command that will show me the list mac addresses connected to a port. I suspect more than one device connected to a port. Thanks

Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb



------------------------------------
http://www.bbc.co.uk
This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in
error, please delete it from your system.
Do not use, copy or disclose the
information in any way nor act in reliance on it and notify the sender immediately.
Please note that the BBC monitors e-mails sent or received.
Further communication will signify your consent to this.
------------------------------------

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list