[c-nsp] 1001-F ESP

[MKS]

Hi

I have a ASR 1001-F. Is there a cmd or mib so I can plot the current
throughput (to see if I need to upgrade to 5G license)

LAB#show platform hardware throughput level
The current throughput level is 2500000 kb/s

What about the ESP load, the following command doesn't show me the ESP
load, on a 1001-F (15.1)
Is this a platform issue or a sw issue (the command works on a 1006)

LAB#show platform software status control-processor
RP0: online, statistics updated 9 seconds ago
Load Average: healthy
  1-Min: 0.07, status: healthy, under 8.00
  5-Min: 0.04, status: healthy, under 8.00
  15-Min: 0.00, status: healthy, under 10.00
Memory (kb): healthy
  Total: 3944844
  Used: 3005656 (76%)
  Free: 939188 (24%)
  Committed: 2743956 (70%), status: healthy, under 300%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
  User:  1.30, System:  0.90, Nice:  0.00, Idle: 97.80
  IRQ:  0.00, SIRQ:  0.00, IOwait:  0.00
CPU1: CPU Utilization (percentage of time spent)
  User:  1.00, System:  1.20, Nice:  0.00, Idle: 97.70
  IRQ:  0.10, SIRQ:  0.00, IOwait:  0.00

Regards
MKS