[c-nsp] Chane subinterface MTU

Garry gkg at gmx.de
Mon Nov 5 14:08:53 EST 2012


On 05.11.2012 19:40, Darren O'Connor wrote:
> All.
>
> Is it possible to change the subinterface MTU to be different than another subinterface on the same physical port? I've got no problem doing this on my Brocade XMR kit. The Cisco always pulls the MTU form the physical interface and I've found no way to have a different one.
>
You can configure the IP MTU for the interface and/or subinterfaces ... 
just like you can configure MPLS MTU, etc ... should do what you need 
... just make sure the physical MTU is set large enough (IOS will ensure 
you can't exceed the physical interface's MTU)

-garry


More information about the cisco-nsp mailing list