[c-nsp] Chane subinterface MTU

[Darren O'Connor]

Phil, this is a 7200 NPE-G2 running 12.2 SRE (33)

I'm going to try Gary's suggestion earlier in the thread tomorrow. Should work!

Thanks

> Subject: Re: [c-nsp] Chane subinterface MTU
> From: p.mayers at imperial.ac.uk
> Date: Mon, 5 Nov 2012 19:32:13 +0000
> To: darrenoc at outlook.com; cisco-nsp at puck.nether.net
> 
> Platform and ios? Interface type? And which mtu - layer 2 or layer 3?
> 
> Darren O'Connor <darrenoc at outlook.com> wrote:
> 
> >All.
> >
> >Is it possible to change the subinterface MTU to be different than
> >another subinterface on the same physical port? I've got no problem
> >doing this on my Brocade XMR kit. The Cisco always pulls the MTU form
> >the physical interface and I've found no way to have a different one.
> >
> >Thanks
> >
> >Darren
> > 		 	   		  
> 
> -- 
> Sent from my mobile device, please excuse brevity and typos.