[c-nsp] Nexus 7K NX-OS Upgrade

Antonio Soares amsoares at netcabo.pt
Tue Nov 6 18:04:46 EST 2012


Thanks, I appreciate your feedback. Since it is a lab environment, may I ask
you to see what happens when you upgrade with the "install all" script and
with the sup in slot 6 ? I had the problem when upgrading from 5.1.3 to
5.2.3a. Now I need to upgrade to 5.2.7 and I want to avoid the issue.



Regards,

Antonio Soares, CCIE #18473 (R&S/SP)
amsoares at netcabo.pt
http://www.ccie18473.net


-----Original Message-----
From: Charles Spurgeon [mailto:c.spurgeon at austin.utexas.edu] 
Sent: terça-feira, 6 de Novembro de 2012 22:39
To: Antonio Soares
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Nexus 7K NX-OS Upgrade

On Tue, Nov 06, 2012 at 10:38:46AM +0000, Antonio Soares wrote:
> Hello group,
> 
>  
> 
> Anyone knows the difference between using the install all script or 
> just update the boot system flash command when upgrading NX-OS on a Nexus
7K ?
> 

> In summary, is there any problem if I simply update the boot variables 
> and reload ? May I end up with the supervisor running the new NX-OS 
> release and the modules the old NX-OS release ?
> 

I was just testing that this aft and it works fine in my lab tests, with the
caveat that I have a dual-sup 7010. 

Manually configuring the boot strings and then typing reload resulted in
sups and mods all coming up on the new code.

-Charles

Charles E. Spurgeon / UTnet
UT Austin ITS / Networking
c.spurgeon at its.utexas.edu / 512.475.9265





More information about the cisco-nsp mailing list