[c-nsp] ASR903 - firmware versions

[Pshem Kowalczyk]

Hi,

We had a problem with one of the RSPs in an ASR903. The card got RMA'ed
(R0/F0) and after getting it replaced and software upgraded to 3.7.1 it all
works fine (including active-standby switchover). I'm not sure if it's an
issue or not, but the show platform shows different firmware (older)  for
the newly added card. The CPLD versions are the same. I haven't been able
to find any specific information about the 'firmware' on Cisco website. Any
idea what this firmware number actually represents?

Chassis type: ASR-903

Slot      Type                State                 Insert time (ago)
--------- ------------------- --------------------- -----------------
 0/0      A900-IMA1X          ok                    00:45:16
 0/1      A900-IMA1X          ok                    00:45:11
 0/2      A900-IMA1X          ok                    00:45:06
 0/3      A900-IMA1X          ok                    00:45:01
 0/4      A900-IMA8S          ok                    00:44:57
 0/5      A900-IMA8S          ok                    00:44:57
R0        A903-RSP1B-55       ok, standby           00:48:49
R1        A903-RSP1B-55       ok, active            00:48:49
F0                            ok, standby           00:48:49
F1                            ok, active            00:48:49
P0        A900-PWR550-D       ok                    00:46:58
P1        A900-PWR550-D       ok                    00:46:57
P2        A903-FAN            ok                    00:46:55

Slot      CPLD Version        Firmware Version
--------- ------------------- ---------------------------------------
R0        11102133            15.2(1r)S1
R1        11102133            15.3(1r)S1
F0        11102133            15.2(1r)S1
F1        11102133            15.3(1r)S1

kind regards
Pshem