[c-nsp] PPPOE GIG SUB-INTEREFACE - 15.2S 7606-S

[Christophe Lucas]

Le 06/11/2012 10:22, Jake Jake a écrit :
> We have an environment where we terminate our DSL customers over PPPoE on a
> 7606-S MPLS PE router with RSP720. The PPPoE sessions are terminated on a
> GIG V2 interface of a SIP-400. Currently the IOS running on the device is
> c7600rsp72043_rp-ADVIPSERVICESK9-M, Version 12.2(33)SRD. The following is
> the current configuration used.
> 
> bba-group pppoe 7
> virtual-template 7
> 
> interface GigabitEthernet2/1/3.142647 access
> encapsulation dot1Q 14 second-dot1q 2647
> pppoe enable group 7
> 
> interface Virtual-Template7
> ip vrf forwarding TEST
> ip address 10.10.10.1 255.255.255.252
> 
> In the  above scenario everything works well.
> 
> However we had to upgrade the router IOS to    15.2(4)S Advance
> IPServicesk9 to support 4-byte ASN. After the upgrading we observed certain
> commands used to terminate PPPoE on the sub-interfaces not available on
> 15.2(4)S , although  PPPoE on Gig and Ethernet with QinQ support is listed
> under 15.2S feature set.
> 
> Command not available on 15.2S >>>>  pppoe enable group 7
> 
> Any suggestion on how to get this working on 15.2S IOS?

Hello,

Perhaps it is a mistake : which feature set ? universal ? Feature
navigator seems to say it is supported on 15.2(4)S.

Best regards,
-- 
Christophe Lucas
http://www.clucas.fr/blog/