[c-nsp] High CPU: punted packets

[Jefri Abdullah]

On 2012-11-22 02:56 PM, Saku Ytti wrote:


> Try:
> sh mls cef lookup DST detail
> <from above 2nd line of useful output there is A:<number> take this
> number>
> sh mls cef adjacency entry <number> detail
>


This is the output, it seems no problem with the MTU:

router-x#show mls cef vrf VPN_PAYLOAD lookup 10.15.96.10 detail

Codes: M - mask entry, V - value entry, A - adjacency index, P - 
priority bit
        D - full don't switch, m - load balancing modnumber, B - BGP 
Bucket sel
        V0 - Vlan 0,C0 - don't comp bit 0,V1 - Vlan 1,C1 - don't comp 
bit 1
        RVTEN - RPF Vlan table enable, RVTSEL - RPF Vlan table select
Format: IPV4_DA - (8 | xtag vpn pi cr recirc tos prefix)
Format: IPV4_SA - (9 | xtag vpn pi cr recirc prefix)
M(2226   ): E | 1 FFF  0 0 0 0   255.255.255.255
V(2226   ): 8 | 1 257  0 0 0 0   10.15.96.10        (A:295673 
,P:1,D:0,m:0 ,B:0 )


router-x#show mls cef adjacency entry 295673 detail

Index: 295673  smac: 0024.c4c0.0b40, dmac: 9055.aea3.7c9d
                mtu: 1280, vlan: 760, dindex: 0x0, l3rw_vld: 1
                format: MAC_TCP, flags: 0x2000208408
                delta_seq: 35584, delta_ack: 0
                packets: 0, bytes: 0



-- 

Regards,

Jefri Abdullah