[c-nsp] sup2t XL with non XL linecards

[. .]

Hi,

>
http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a00809a7673.shtml

Thanks, that link helps a bit, but still a bit unclear on things. =) Assuming I
don't need the performance and the 30 Mpps of sup2t is fine for a centralized
forwarding system, and happy to have linecards send packets over the fabric for
forwarding by the supervisor, do I need XL at all, or if full tables with ~400k
routes are required, I must get the XL version of sup2t?

Thanks!

--
This e-mail was brought to you by Cosmo Mail
http://www.cosmo.com/