[c-nsp] CRC errors on fastethernet interface

[Mikael Abrahamsson]

On Mon, 26 Nov 2012, Joseph Mays wrote:

> This is a complete surprise to me, to say the least. If there is some 
> other command to set the speed, I can't find it.

PA-FE and IO-FE does afaik, only support 100 meg (not 10 meg) and only 
half and full duplex, not autoneg.

The IO-2FE and PA-2FE-TX support autoneg and 10/100.

-- 
Mikael Abrahamsson    email: swmike at swm.pp.se