[c-nsp] CRC errors on fastethernet interface

[Gert Doering]

Hi,

On Mon, Nov 26, 2012 at 12:48:27PM -0500, Joseph Mays wrote:
> core-gw1.noc(config)#int fastethernet0/0
> core-gw1.noc(config-if)#speed 100
>                          ^
> % Invalid input detected at '^' marker.

The 7200 single-port FE interfaces are way dumb.  No autoneg, no 10 Mbit
(unless you use a MII transceiver that can do 10m).

Of all reasons why people disable autoneg and wire ports to 100/full, the
only valid one I've seen in a long time is "a 7200 single-port FE on the
other end".  Add insult to injury, it can't do baby jumbos (mtu 1530)
either...

The 2FE is better.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20121126/4cda3063/attachment.sig>