[c-nsp] MST Experiences: was Re: Dell switches (specifically PowerConnect 7048P) and Ciscos

[Vinny_Abello at Dell.com]

Dell FTOS has PVST on our Force10 switches. I won't claim familiarity with it or differences to Cisco PVST+ as I don't work in the F10 group, but I know it's there. I can find a Dell F10 contact for you if you have questions about it. Interoperability testing has been done and documented here:

http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/DELL_Force10_Interoperability_Guide.pdf

-Vinny

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Mayers
Sent: Tuesday, November 27, 2012 7:34 AM
To: Reuben Farrelly
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] MST Experiences: was Re: Dell switches (specifically PowerConnect 7048P) and Ciscos

On 27/11/12 12:27, Reuben Farrelly wrote:

>
> What vendors, other than Cisco, support some form of Rapid-PVST?  I
> believe Arista do on their switches - are there any others?  If it's

Extreme, Foundry, HP in older firmware (newer firmware dropped it in 
favour of MST, IIRC - sigh). I think it's pretty widespread, TBH.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/