[c-nsp] cisco 2960 snmp interface description

[Nikolay Shopik]

If you talk about traps, they don't send ifAlias.
We write script which do additional snmpwalk based on ifIndex to findout
ifAlias and then send trap with this info.

On 03.10.2012 0:15, Michael Sprouffske wrote:
> this is what I get
> 
> snmpTrapOID.0 = snmpTraps.3
>  ifIndex.10005 = 10005
>  ifDescr.10005 = FastEthernet0/5
>  ifType.10005 = 6
> 
> 
> 
> 
> 
> ________________________________
>  From: Nikolay Shopik <shopik at inblock.ru>
> To: cisco-nsp at puck.nether.net 
> Sent: Tuesday, October 2, 2012 1:11 PM
> Subject: Re: [c-nsp] cisco 2960 snmp interface description
>  
> If you have default snmp config on 2960, there nothing additional need
> to pass interface names. Its in ifAlias not in ifDescr
> 
> On 02.10.2012 23:46, Michael Sprouffske wrote:
>> What needs to be done in order for the switch to pass the descriptions of the interfaces.  I looked at a debug and the switch is only sending the physical interface name and not the description.  I did a walk on the device and was able to pull this information.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>