[c-nsp] Half duplex VRF

[Arie Vayner (avayner)]

Hitesh, how does your virtual-access look like for the spokes?
Can you please share the "show run interface virtual-access xx" for the spokes?

Tnx
Arie

From: Hitesh Vinzoda [mailto:vinzoda.hitesh at gmail.com]
Sent: Tuesday, October 09, 2012 09:05
To: Arie Vayner (avayner)
Cc: Cisco Mailing list
Subject: Re: [c-nsp] Half duplex VRF

Hi Arie,

I have attached topology, .Net file and configs of related devices. R8 and R9 are simulating spokes whereas Internet-RTR is simulating Hub.

Cheers

Hitesh
On Tue, Oct 9, 2012 at 8:37 PM, Arie Vayner (avayner) <avayner at cisco.com<mailto:avayner at cisco.com>> wrote:
Hitesh, can you maybe share some of your configs?
Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net<mailto:cisco-nsp-bounces at puck.nether.net> [mailto:cisco-nsp-bounces at puck.nether.net<mailto:cisco-nsp-bounces at puck.nether.net>] On Behalf Of Hitesh Vinzoda
Sent: Tuesday, October 09, 2012 07:04
To: Cisco Mailing list
Subject: [c-nsp] Half duplex VRF

I am trying to setup half duplex vrf to save vrf's on the LNS. Does anyone has working configuration for spokes and Hub connected on the same PE router i.e. LNS. So far i able to export-import the routes but the traces from one spoke to other goes directly via LNS instead of via Hub.

Please advise.

TIA
Hitesh
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/