[c-nsp] Slips

Joseph Mays mays at win.net
Tue Oct 9 12:23:44 EDT 2012


It occurs to me that there is an assumption built into this that is 
unproven. Does setting the AS5400 to internal clocking on the T3 cause it to 
provide clocking for the T1's on the T3? We have assumed that it does. If 
not, how do we tell it to provide an outgoing clock signal for the T1's on 
the T3?


----- Original Message ----- 
From: "Joseph Mays" <mays at win.net>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 09, 2012 11:45 AM
Subject: [c-nsp] Slips


> We have an AS5400 that we are using to provide PRI's to customers. It has 
> the following circuits coming into it from the Telco (AT&T).
>
> 5 Trunking circuits that come across T1 ties into a t3 mux, and then are 
> then delivered to a T3 port on the AS5400. ! trunking circuit that is 
> connected into a T1 card on the AS5400. Several circuits to customers that 
> are delivered out of the T3 through the mux to T1 tie pairs through AT&T, 
> and some of which go through HDSL T1's that we provide.
>
> We have clocking set up thusly. The T1 port that has the trunk line in it 
> (Serial6/0) is set to clock source line, to get clocking from AT&T.
> The TDM clock priority on AS5400 is set to Serial6/0.
> The T3 that has all the other T1's is set to clock source internal, on the 
> assumption that the internal clock on the AS5400 should now be 
> synchronizing to the trunk line coming in on 6/0. So all the T1 channels 
> on the T3 should be following the Cisco clock.
> The mux is set to clocking is set on the t3 to clock source line, to get 
> clocking from the T3 coming from the AS5400.
> The customers at the end are all set to clock source line.
>
> None of the trunks is having slips, but several of the AT&T customers are 
> showing a slip every 10 seconds or so. The clocking chain we have set up 
> seems logical to me. Is there something I'm missing? Why would the 
> customers be having slips.
>
> We asked AT&T to monitor one of the lines that we are seeing slips on. 
> They watched it for a bit and said no slips are occurring, though I am 
> seeing them both on the AS5400 and on the Customer router. They are 
> performing a more indepth test now.
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/ 



More information about the cisco-nsp mailing list