[c-nsp] BGP full table - 7200 NPE-G2

[Charles Sprickman]

On Oct 16, 2012, at 10:49 PM, CiscoNSP_list CiscoNSP_list wrote:

> Hi Guys,
> 
> Currently have a 7200 NPE-G2 taking a full bgp table - Looking at getting another upstream, and also taking a full table from them....The NPE-G2 should handle this ok?

Does this help?

l3-router#sh mem sum
                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)
Processor    6B934E0   1883685636   357038688   1526646948   1519396896   1514586884
      I/O   78000000    67108864     8818592    58290272    58056480    58228700
Transient   77000000    16777216      141092    16636124    13631488    16586364

Neighbor     V          AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
x.x.x.x      4       yyyy 16718073  515900 20355657    0    0 4w6d        79513
x.x.x.x      4       yyyy 11846634   99091 20355657    0    0 9w6d       159199
x.x.x.x      4       yyyy 13888256  516045 20355657    0    0 9w6d       159199

I'm filtering some stuff, but my understanding is that even without the routes installed they do consume memory.

I can see a CPU hit at times from the BGP process if something flaps, but it's not an OMGWTFBBQ sort of spike...

Charles

> 
> Cheers  		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/