[c-nsp] BGP full table - 7200 NPE-G2
Chuck Church
chuckchurch at gmail.com
Wed Oct 17 08:10:33 EDT 2012
I've got a 2821 running 12.4 mainline with two feeds, its 768MB RAM still
has about 300MB free. You should be fine. 15.0 or 15.1 will probably use
more RAM, but if you're anywhere near 500MB free, the second feed shouldn't
use any more than 100MB additional.
Chuck
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of CiscoNSP_list
CiscoNSP_list
Sent: Wednesday, October 17, 2012 3:03 AM
To: saku at ytti.fi; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] BGP full table - 7200 NPE-G2
Thanks - unfortunately this 7200 is 1000Km's away, so ram upgrade is not
easy Will 1GB support 2 full tables?
> Date: Wed, 17 Oct 2012 09:38:59 +0300
> From: saku at ytti.fi
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] BGP full table - 7200 NPE-G2
>
> On (2012-10-17 14:23 +1100), CiscoNSP_list CiscoNSP_list wrote:
>
> > Apologies - No, only 1Gb ram....
>
> DRAM is practically free and in these cases often literally if you
> have time to snoop other people's trashes.
> Always max out DRAM before deploying new routers, as the cost of work
> to do it later is orders of magnitude higher than cost of part to do
> it pre-deployment.
>
> --
> ++ytti
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list