[c-nsp] IPv6 PE-CE

[Mohammad Khalil]

Thanks Paul
The issue is when I used the Cisco feature navigator , I only found IOS XR for the mentioned keyword below (OSPFv3)

BR,
Mohammad

> Date: Wed, 17 Oct 2012 21:44:04 -0500
> From: paul at lituya.com
> To: eng_mssk at hotmail.com
> CC: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] IPv6 PE-CE
> 
> OSPFv3 PE-CE is supported starting with IOS 15.2(2)S. The feature name 
> is "OSPFv3 VRF-Lite/PE-CE".
> 
> Note that you need to use the new form of the OSPFv3 CLI. For example:
> 
> interface f0/0
>   vrf forwarding red
>   ipv6 address 2001:db8:1::1/64
>   ospfv3 1 ipv6 area 0
> 
> interface f1/0
>   vrf forwarding blue
>   ipv6 address 2001:db8:2::1/64
>   ospfv3 1 ipv6 area 1
> 
> router ospfv3 1
>   router-id 1.1.1.1
>   !
>   address-family ipv6 vrf red
>    redistribute bgp 65000
>   exit-address-family
>   !
>   address-family ipv6 vrf blue
>    redistribute bgp 65000
>   exit-address-family
> 
> Also "show ospfv3 vrf red ..." etc.
> 
> Regards,
> Paul
> 
> 
> On 10/17/2012 09:11 AM, Mohammad Khalil wrote:
> >
> > Hi all,
> > I was trying to implement OSPFv3 and EIGRP6 as the PE-CE in 6VPE deployment but seems IOS does not support that yet
> > Was there any updates in regards?
> >
> > Thanks
> >   		 	   		
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>