[c-nsp] Cisco Nexus 5596
Andrey Petrenko
andy.petrenko at gmail.com
Sat Oct 20 11:07:58 EDT 2012
not helping.
# sh int eth2/1
Ethernet2/1 is up
Hardware: 1000/10000 Ethernet, address: 547f.ee8e.1a70 (bia 547f.ee8e.1a70)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
!
interface Ethernet2/1
switchport mode fex-fabric
fex associate 100
!
# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
--- -------- Connected N2K-C2232PP-10GE FOC162516J5
!
feature fex
!
fex 100
pinning max-links 1
description "FEX0100"
!
# sh int fex-fabric
Fabric Fabric Fex FEX
Fex Port Port State Uplink Model Serial
---------------------------------------------------------------
100 Eth2/1 Active 8 N2K-C2232PP-10GE FOC162516J5
!
sh fex 100 det
FEX 100 not found
!
--
With best regards,
Andrey 'sshd' Petrenko
xmmp\gtalk: andy.petrenko at gmail.com
skype: andy.petrenko
web: http://sshd.by
On 20.10.2012, at 10:37, Fredrik Lönnman <Fredrik.Lonnman at caperio.se> wrote:
> Try deleting "switchport access vlan 14" and "duplex full" from the e2/1 configuration.
>
> Regards,
> Fredrik
> ________________________________________
> Från: cisco-nsp-bounces at puck.nether.net [cisco-nsp-bounces at puck.nether.net] för Andrey Petrenko [andy.petrenko at gmail.com]
> Skickat: den 20 oktober 2012 00:57
> Till: cisco-nsp at puck.nether.net
> Ämne: [c-nsp] Cisco Nexus 5596
>
> I connect to this device extended card. Configure FEX:
> !
> feature fex
> !
> fex 100
> pinning max-links 1
> hardware N2232TP queue-limit
> type N2232P
> !
> do sh fex ad see:
>
> # sh fex
> FEX FEX FEX FEX
> Number Description State Model Serial
> ------------------------------------------------------------------------
> --- -------- Connected N2K-C2232PP-10GE FOC162516J5
>
> !
> interface Ethernet2/1
> switchport mode fex-fabric
> switchport access vlan 14
> fex associate 100
> duplex full
> !
> Ethernet2/1 is up
> Hardware: 1000/10000 Ethernet, address: 547f.ee8e.1a70 (bia 547f.ee8e.1a70)
> !
> sh fex 100
> FEX 100 not found
> !
>
> # sh log last 40
> %FEX-5-PINNING_CHANGED: Fex 100 pinning information is changed
> %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on 10.101.9.100 at pts/0
> %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on 10.101.9.100 at pts/0
> %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 8 of Fex 100 that is connected with Ethernet2/1 changed its status
> from Discovered to Configured
> %ETHPORT-5-IF_DOWN_INITIALIZING: Interface Ethernet2/1 is down (Initializing)
>
> what my mistake?
>
> P.S.
> Cisco Nexus Operating System (NX-OS) Software
> Software
> BIOS: version 3.5.0
> loader: version N/A
> kickstart: version 5.0(3)N1(1c)
> system: version 5.0(3)N1(1c)
> power-seq: Module 1: version v4.0
> Module 2: version v0.0
> Module 3: version v1.0
> Module 4: version v1.0
> uC: version v1.0.0.2
> SFP uC: Module 1: v1.0.0.0
> BIOS compile time: 02/03/2011
> kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.3.N1.1c.bin
> kickstart compile time: 5/4/2011 3:00:00 [05/04/2011 10:43:31]
> system image file is: bootflash:/n5000-uk9.5.0.3.N1.1c.bin
> system compile time: 5/4/2011 3:00:00 [05/04/2011 12:35:20]
>
>
> Hardware
> cisco Nexus5596 Chassis ("O2 48X10GE/Modular Supervisor")
> Intel(R) Xeon(R) CPU with 8299528 kB of memory.
> Processor Board ID JAF1522AMEG
>
> Device name: nexus2.wh.sc.gwallet.com
> bootflash: 1908736 kB
>
>
>
>
> --
> With best regards,
> Andrey 'sshd' Petrenko
> xmmp\gtalk: andy.petrenko at gmail.com
> skype: andy.petrenko
> web: http://sshd.by
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list